Protein quality assessment
MPQS and PAQS calculator
Calculate protein quality within meals with MPQS and daily protein adequacy with PAQS. Upload dietary intake and amino-acid data to assess protein quantity, amino-acid composition and digestibility, then download both calculations in one ZIP.
Understand the scoresMPQS paper and guideResearch in older adultsHow to cite
Select your files
Processed in your browserResults
Your calculations are ready
Using these results? Cite the paper for each score you report and this web tool. Your ZIP includes all three references as RIS, BibTeX and plain text.
PAQS calculation method 4.0.0; MPQS calculation method 1.0.0. View the methods and assumptions. Download your results before closing or refreshing this page.
Your files stay on your device. Inputs and results are not stored on the website and are cleared when you refresh the page.
The published method
Protein quality assessment with MPQS and PAQS
PAQS · adequacy across the day
The Protein Adequacy and Quality Score adds meal contributions to a daily ratio. A PAQS of 1 corresponds to the selected daily protein EAR of 0.66 g/kg under the model assumptions.
MPQS · protein within a meal
The Meal Protein Quality Score compares each meal's digestible amino acids with the paper's requirements based on 0.3 g protein/kg per meal. An MPQS of 100 means all these amino-acid requirements are met. Scores can exceed 100.
The Protein Adequacy and Quality Score compares the estimated amount of usable protein with protein requirements. The calculation accounts for the amount of food, its amino-acid composition and digestibility. Foods within the same meal can complement each other.
- Calculate each mealAdd the digestible amino acids and protein from all foods and express them per kilogram of body weight.
- Identify the limiting componentCompare the nine indispensable amino-acid groups and digestible protein with their reference values. The lowest ratio determines the meal's contribution.
- Add up the dayThe sum of the meal contributions is the daily PAQS. It is a ratio, not a percentage.
A daily PAQS of 1 means that the calculated amount of usable protein equals the selected Estimated Average Requirement (EAR): 0.66 g protein/kg/day. The score depends on the input data and calculation assumptions. It is not a personal dietary recommendation or a clinical diagnosis of deficiency.
Source: Heerschop et al. (2025), the original PAQS paper.
For MPQS, the amino acid with the lowest requirement coverage determines the meal score. Surplus methionine can contribute to the cysteine requirement; cysteine cannot replace methionine. MPQS uses its own meal reference values and has no additional total-amino-acid constraint. Each meal is assessed separately, including snacks if they have their own meal identifier. Adding MPQS values does not give daily PAQS.
Source: Grootswagers et al. (2024), the original MPQS paper. Neither score is a clinical diagnosis or an individualized protein recommendation.
The science behind MPQS
From amino acids to a meal protein quality score
Pol Grootswagers and colleagues developed the Meal Protein Quality Score (MPQS) to assess the quantity and quality of protein in whole meals. The method combines the amount of each food, its digestible essential amino acids and the meal requirements used for the person eating it.
The original paper in Current Developments in Nutrition describes the method and its application to hospital recipes and food records from older adults. For an accessible introduction to protein quality calculation, read Pol's explanation of what MPQS measures, what a score of 100 means and which assumptions matter.
Grootswagers et al. (2024): the MPQS paper Meal Protein Quality Score: looking beyond grams of protein
PAQS in research
Long-term plant-based diets in older adults
Wildemast, Verlaan and Grootswagers applied PAQS to three-day food records from twenty vegetarians and six vegans, with a median age of 76 years. The reference group consisted of 771 older omnivores. PAQS assessed daily intake; MPQS assessed individual meals.
PAQS was below 1 for many participants. This small observational study describes dietary intake and does not establish that the dietary pattern caused changes in muscle mass or health.
How to cite
If you use these results in a publication, report or presentation, please cite the original paper for each score you report and this web tool. For PAQS cite Heerschop and colleagues; for MPQS cite Grootswagers and colleagues. Report the calculator version and the digestibility source used in your analysis.
PAQS paper
Heerschop SN, Biesbroek S, Daas MC, Kuijsten A, Gurinović M, Geleijnse JM, van 't Veer P. Protein Adequacy in Europe: Adjusting Crude Intakes Using the Protein Adequacy and Quality Score (PAQS). Current Developments in Nutrition. 2025;9(10):107539. https://doi.org/10.1016/j.cdnut.2025.107539
MPQS paper
Grootswagers P, Christensen SH, Timmer M, Riley W, de Groot L, Tetens I. Meal Protein Quality Score: A Novel Tool to Evaluate Protein Quantity and Quality of Meals. Current Developments in Nutrition. 2024;8(9):104439. https://doi.org/10.1016/j.cdnut.2024.104439
This web tool
Grootswagers P. MPQS and PAQS calculator [web tool]. Version 4.0.0. 2026. https://polgrootswagers.nl/mpqs-paqs-calculator/ (accessed [date]).
Download all three references
Import RIS into Zotero, EndNote or Mendeley, or use BibTeX with LaTeX. Each download includes the PAQS paper, the MPQS paper and this calculator.
Citation downloads fill in the access date automatically and are also included in your results ZIP. When copying the reference above, replace [date] with the date you used the tool. Adapt the formatting to your journal or institution's citation style.
Calculation methods and input choices
PAQS calculation method 4.0.0 compares nine indispensable amino-acid groups and digestible protein with the references in Heerschop et al. The protein reference is 0.66 g/kg/day. MPQS calculation method 1.0.0 follows the meal requirements and one-way methionine-to-cysteine adjustment described by Grootswagers et al.
Assumptions and preparing your data
Normalized amino-acid values as input
The calculation assumes amino-acid contents are already normalized to each food's crude protein content, as in the database preparation described by Heerschop et al. Supply amino acids in mg per 100 g of food and protein in g per 100 g, before applying digestibility. The tool uses your protein values directly; it does not estimate protein from the amino-acid sum or automatically normalize the database.
Complete conversion of surplus IAA
The calculation assumes that surplus indispensable amino acids (IAA) are fully available for the synthesis of dispensable amino acids (DAA). Under this assumption, DAA cannot impose a lower limit than the IAA and protein terms, so there is no separate DAA term. Per meal, PAQS is the minimum of nine IAA ratios and digestible protein divided by 0.66 g/kg. Daily PAQS is the sum of these meal minima, without capping.
Choose the digestibility source
PAQS paper method, the default, uses one protein_digestibility factor for all amino acids and protein in each food. Heerschop et al. used fecal protein factors by food group, an approach also used in PDCAAS. PAQS-TID (variant; differs from Heerschop et al.) uses 11 amino-acid-specific factors for the IAA ratios and protein_digestibility for the protein ratio. Use ileal estimates when describing amino-acid inputs as DIAAS-style. The original MPQS work prioritized available ileal estimates and used fecal estimates where needed.
The same selected factors are used for MPQS. The calculator cannot verify their source or whether they are fecal or ileal. Document those choices with your analysis. Enter digestibility factors, not published PDCAAS or DIAAS scores.
Missing data and coverage
Missing amino-acid and protein cells count as 0. Missing digestibility cells use 1 (100%). The ZIP logs these assumptions in missing_values_assumptions.csv. Required columns cannot be missing: protein and protein digestibility are never reconstructed from other columns. In AA-specific mode, you can optionally ask to review replacements using each food’s supplied protein digestibility. Yes approves one cell, Yes to all approves the remaining eligible cells in that run, and I’ll fix it myself stops the run. Approved replacements are logged separately. An explicit digestibility of 0 remains 0. These missing-data choices are calculator policies, not procedures from the papers.
Every intake row needs ID, dayId and mealId. The mealName may be blank. Blank food codes are skipped and logged; a filled-in code absent from the database needs an approved listed NEVO replacement present in your database, or the run stops. Check skipped records before interpreting scores.
Daily records and interpretation
The tool calculates PAQS for the person-days you provide and averages the unrounded daily values. Results retain full numerical precision. The additional pooled_day_score treats a day's foods as one combined meal and is diagnostic; it does not replace the sum of meal minima. Within a person-day, one unique positive body weight is used even if some rows omit it. No positive weight means the day is skipped and logged; conflicting positive weights stop the run.
The tool does not adjust for energy misreporting or variation between recording days, or estimate the distribution of usual intake or the prevalence of inadequate intake in a population.
Sources: the methods section of Heerschop et al. and supplementary methods and Table 3 (Word). The formulas and reference values appear below and in the downloaded ZIP file.
Comparing earlier results
PAQS method 4.0.0 uses digestible protein from the protein column as the quantity constraint. Earlier website versions used the sum of 17 selected amino acids, which can underestimate the total. The default now follows the paper's shared food-level digestibility method, and six DAA columns are no longer required. The same intake can therefore produce different scores.
Protein and protein-digestibility columns are required. Missing cells follow the logged defaults described above; missing columns stop the run. MPQS retains its separate formula and method version. The Python runner 2.0.0 and website PAQS method 4.0.0 implement the same PAQS formula.
Keep the ZIP file and its versions with your analysis. Use the same calculator version and digestibility mode when making a reproducible comparison.
Prepare your files
Use the templates or check the columns below.
01 Intake file7 columns
Upload a CSV with the following column names, using these column names. Similar names can be matched after your approval. Use food codes from your amino-acid database; listed NEVO alternatives can be approved when a code is absent.
| Column | Contents | Example |
|---|---|---|
ID | Required person identifier; cannot be missing | P001 |
bodyWeight | Body weight in kg. Supply one unique positive value within each person-day; it may be repeated or omitted on other rows. | 70 |
dayId | Required day identifier; cannot be missing | 1 |
mealId | Required meal identifier within that day; cannot be missing | 1 |
mealName | Meal name; may be blank | Breakfast |
productCode | Food code matching the database. A blank code is skipped and logged; an unknown filled-in code needs an approved listed NEVO replacement or the run stops. | 1001 |
quantity | Amount consumed in grams | 150 |
A meal can contain several food rows. The calculation groups rows by ID, dayId and mealId.
02 Amino-acid database (aa_db)14 or 25 required columns
Upload an XLSX or CSV file with one row per unique productcode. For Excel files, the first worksheet is used. Both modes require the food code, protein, protein_digestibility and 11 amino-acid columns: 14 columns in total. AA-specific mode adds 11 digestibility columns, bringing the total to 25. The template follows your selected mode. The six DAA columns from earlier versions are no longer required.
Food code
productcode links each food to productCode in the intake file.
Protein · g per 100 g of food
protein supplies the protein quantity term. Use the measured or source database value. The calculator never derives protein from the amino-acid sum.
Amino acids · mg per 100 g of food
Supply amino-acid contents before adjustment for digestibility; the tool applies your selected factors. See the methods and assumptions for details on preparing the amino-acid values.
histidineisoleucineleucinelysinemethioninecysteinephenylalaninetyrosinethreoninetryptophanvaline
Digestibility · decimal fraction
Both modes require protein_digestibility; proteinDigestibility and digestibility_protein are accepted aliases. Use only one of these equivalent column names. This food-level factor must be between 0 and 1. Paper mode applies it to both protein and amino acids. For AA-specific inputs, also supply the 11 columns below. Enter 80% digestibility as 0.8, not 80.
AA-specific estimates above 1, such as 1.12, are accepted unchanged and flagged so you can check their source and units. This exception applies to the amino-acid factors, not protein_digestibility. Supply digestibility factors, not PDCAAS or DIAAS scores. Negative values are not accepted.
digestibility_histidinedigestibility_isoleucinedigestibility_leucinedigestibility_lysinedigestibility_methioninedigestibility_cysteinedigestibility_phenylalaninedigestibility_tyrosinedigestibility_threoninedigestibility_tryptophandigestibility_valine
03 File format and missing values
- Use a comma as the CSV separator with a decimal point, or a semicolon as the separator with a decimal comma.
- The intake CSV can be up to 1 GiB (1,024 MiB). The amino-acid database can be up to 20 MiB and 100,000 data rows.
- Large datasets are processed in automatic batches, keeping each person's records together. You receive one combined results ZIP. The browser may read the file several times; the progress percentage shows the current batch. You can cancel at any time.
- Use a desktop browser for large cohorts. Processing stays on your device and does not store temporary input files. A single person's records must fit within a batch of up to 100,000 meals and 100,000 person-days.
- Missing amino-acid amounts, protein amounts and consumed quantities count as 0. Missing digestibility cells use 1 (100%). Database assumptions are logged in
missing_values_assumptions.csv. Required columns must still be present. Missing identifiers are errors; a blank meal name is allowed. - In AA-specific mode, the optional replacement setting lets you approve the same food’s supplied protein digestibility for missing AA factors. Approved replacements are listed in
digestibility_imputations.csvin the results ZIP. - A blank intake food code is excluded and logged in
skipped_intake.csv, grouped by person, day and meal. A filled-in food code absent from the database stops the calculation, even when its consumed quantity is 0. - Each person-day must have exactly one unique positive body weight. Missing or zero values on other rows do not override it. No positive weight means the day is skipped and reported in
skipped_days.csv; conflicting positive weights are an error.
04 What is in the ZIP file?
- PAQS per person-day and mean PAQS per person.
- PAQS meal details with calculated amino-acid intake, digestible protein, ratios and contribution to daily PAQS.
- MPQS per meal in
mpqs_per_meal.csv, with component ratios and the limiting amino acid. - Skipped intake records and person-days, so you can check which data were excluded.
- Run information and calculation method documenting input characteristics, warnings, missing-value replacements and digestibility mode.
- Citations in RIS, BibTeX and plain text for the PAQS paper, the MPQS paper and this calculator.
Check the warnings accompanying your results before using the calculations.
05 Formulas and reference values
For each food and amino acid, the absorbed amount in mg/kg body weight is: AA_mg_per_100g × quantity × digestibility / (100 × bodyWeight). These amounts are added within each meal.
Methionine and cysteine are combined, as are phenylalanine and tyrosine. Digestible protein in g per meal is sum(protein_g_per_100g × quantity_g × protein_digestibility / 100).
Take the minimum of nine IAA ratios and the protein ratio: min(IAA_mg / bodyWeight / IAA_reference, digestible_protein_g / bodyWeight / 0.66). Daily PAQS is the sum of the meal minima, without capping. This follows Heerschop et al. (2025); the DAA term is omitted because it cannot be limiting under the assumption of IAA-to-DAA conversion.
The IAA reference values are 11, 20, 40, 32, 15, 27, 17, 4.4 and 26 mg/kg/day for histidine, isoleucine, leucine, lysine, methionine + cysteine, phenylalanine + tyrosine, threonine, tryptophan and valine, respectively. The protein reference is 0.66 g/kg/day. The limiting label for this quantity term is Protein.
Scores are not capped at 1. Person means use unrounded daily values; exported values retain full numerical precision. The diagnostic pooled_day_score applies the same formula to all foods in a day pooled together.
MPQS meal formula
Use the same absorbed amounts in mg/kg body weight, with these separate requirements in mg/kg per meal: histidine 4.5; isoleucine 9; leucine 17.7; lysine 13.5; methionine 4.8; cysteine 1.8; phenylalanine + tyrosine 11.4; threonine 6.9; tryptophan 1.8; valine 11.7.
For the cysteine ratio only, use cysteine + max(0, methionine − 4.8). Then calculate MPQS = 100 × min(each amino-acid amount / its meal requirement). There is no separate total-AA constraint, and the score is not capped at 100. This adjustment does not change the amounts used for PAQS.